Page 1
Harvey Gertsch 480.838.1620 Plam door Vancouver " Kristen Belcheff 253.845.9581 hinges Tina Estrada 800.726.3414 privacy lockset Stanley/Best C & I Show Hardware & Security Systems Susie 480.967.8568 wall stop Ives ABS - American Building Supply Frank Martinez 909.879.8884 kick plate...
TABLE OF CONTENTS Page Page Features ......................2 Deadlocking Latches & Strikes .............10 Specifications ....................3 Lever Features & Dimensions ..............5 How to Order....................3 Function ....................6-9 Shipping Weights ..................4 Strike & Door Prep a ra tion ..............11 Lever Styles & Trim ...................4 9K Sample Specifications ...............11 CORMAX ™...
SHIPPING WEIGHTS The chart is the ap prox i mate shipping weight for the standard 9K func tions locksets. This weight includes the weight of the lockset with the “#15” style lever, “K” style rose, latch, strike package, and box. Listed separately are the ap prox i mate weights for “with core” and “less core”...
LEVER FEATURES Abrasive Lever Option Besides complying with a wide variety of accessibility codes and ordinances, Best Access Systems lever handles are avail able with a special abra sive feature. Abrasive strip on the lever im me di ate ly identifies warn ings on doors to hazardous ar eas for the blind. To order: Designate “AL”...
FUNC TIONS Outside Lever Inside Lever Function & Diag. Description (ANSI No.) Latch operated by Locked by Unlocked by Locked by Unlocked by Single Keyed Entrance • Rotating the inside lever, • Pushing the inside button, • Turning the key in the outside Cannot be locked Always unlocked •...
Page 8
FUNCTIONS Function & Diag. Description Outside Lever Inside Lever (ANSI No.) Locked by Unlocked by Locked by Unlocked by Latch operated by Double Keyed (Continued) Intruder • Rotating inside lever, • Turning key in the inside lever, • Turning key in the inside lever, Cannot be locked Always unlocked •...
Page 9
FUNCTIONS Function & Diag. Inside Lever Description (ANSI No.) Locked by Latch operated by Locked by Unlocked by Unlocked by Electromechanical Electrically • Rotating the inside lever, • Applying 24 Volts DC. Switching off 24 Volts DC Cannot be locked Always unlocked Locked •...
FUNCTIONS Function & Diag. Outside Lever Inside Lever Description (ANSI No.) Locked by Locked by Unlocked by Latch operated by Unlocked by Special (Continued) Exit * Turning the key in the inside lever Always fixed Cannot be unlocked Special * •...
• Several levels of geographical exclusivity, including national exclusivity, are available via the patented side pin feature. • CORMAX cores and keys are available exclusively through Stanley sales offices. Key blanks are only sold to individuals authorized by the customer to ensure key blanks do not end up in the possession of unauthorized personnel either inside or outside the customer’s facility.
3. [2] [_______] each Change keys each keyed core. 4. [6] [_______] each Construction masterkeys. 5. [2] [_______] each Control keys. 6. Install permanent cores in locksets. F. Return construction cores to [{Stanley/BEST} factory representative] [Hardware manufacurer’s representative]. L O C K L E V E R S...
Spring Tool For more information on Stanley Security Solutions’ products, services, and offi ce locations visit our web site at www.stanleysecuritysolutions.com Product information contained in this catalog has been com piled and presented with as much care and com plete ness as is reasonably possible.
Page 14
2/5/2015 BestAccessSystems.com Commercial security solutions provider for door locks and hardware, electronic access systems and key control. Stanley Security Solutions Home Products Documents Support Company Remote Support Knowledge Base Warranty Warranty STANLEY B.A.S.I.S. Warranty LIMITED WARRANTY Except as otherwise provided below, STANLEY warrants that all Products manufactured by STANLEY and sold under its trade names “BEST” and "STANLEY” are free of defects in materials, workmanship and operation, normal wear and tear excepted, for a period of three (3) years from the date of sale to the original purchaser. The liability of STANLEY under this warranty is limited to the repair or replacement of any Product covered by the warranty. Written notice of a claim under this warranty should be mailed to STANLEY SECURITY SOLUTIONS, P.O. Box 50444, Indianapolis, IN 46250. The notice should include information as to the identity of the Product and its defect along with a customer contact name, company name, address, and phone number. STANLEY will then provide shipping directions, with all shipping charges prepaid by you. STANLEY will then cause the Product to be examined and, if found defective and covered under this warranty, will repair or replace said Product at the sole discretion of STANLEY. Warranty service shall only be provided in the United States. 9K Mechanical Cylindrical Lock warranty term shall be seven (7) years from the date of sale to the original purchaser. 45H/47H Mechanical Mortise Lock Warranty term shall be limited lifetime. 48H/49H Mortise Deadlock and all 45HW and 47HW Electromechanical Mortise Lock warranty term shall be five (5) years from the date of sale to the original purchaser. BEST 93KQ, 45HQ and EXQ locks using the Stanley WiQ™ Wireless Technology shall be three (3) years from the date of sale to the original purchaser. Stanley Portal Gateways, Wireless Access Controllers, Antennas and other products using Stanley WiQ™ Wireless Technology not specifically mentioned shall be one (1) year from the date of sale to the original purchaser. Software NT500, Stanley WiQ™ Technology, and B.A.S.I.S. Software Warranty STANLEY warrants that all CD ROM and hardware keys shall be free from defects in material and workmanship and will function in substantial accordance to the specifications for a period of one (1) year from the date of installation. Specific Limitations: The warranty for all NT500, Stanley WiQ™ Technology, and B.A.S.I.S. Software Products does not cover, freeofcharge, any postsales technical support during the warranty under the following circumstances: Calls from subcontractors not authorized by STANLEY Problems caused by misuse of software or hardware.
Page 16
Warranty Hollow Metal Xpress (HMX) guarantees all doors and frames manufactured for a period of one year: to be of good material and workmanship, to be free of defects that would render them unfit for use in the intended manner. Hollow Metal Xpress will –...
Page 18
Protection Plates 8400 Series Protection Plates • Door protection plates are available in .050” thick brass, stainless steel or aluminum; and 1/8” thick high impact polyethylene in clear or black . • Bevel edge options; specify B4E for all four edges. • Mounting screw pack furnished standard, 16 screws per pack. Optional screw packs are available for TEK or TORK screw heads . Refer to the following chart for ordering . • Specify NMH for no mounting holes. (Not available on 8402) • Specify NMH-A for no mounting holes with adhesive. (Not available on 8402) • Specify CS for counter sunk mounting holes.
Page 19
Protection Plates Mop Plates • Protect the bottom of the pull side of door subject to cleaning and mopping procedures . • Size Ranges:4” to 6” high, 22” to 48” wide Kick Plates • Protect the bottom of the push side of doors subject to scuffing from foot traffic . • Recommended for all doors subject to normal use (especially doors using a closer) . • Size Ranges: 8” to 24” high, 22” to 48” wide Stretcher Plates • Protect doors at specific areas where consistent contact is made by stretchers, service carts or other equipment . • Usually applied to push side of doors.
Page 20
Warranty IVES WARRANTY Ives (the "Company") warrants only to Customer that The following costs and expenses are not covered by the the products will be free from defects in material and provisions of this limited warranty: (i) labor costs for the workmanship for a period of 12 months from the date removal and reinstallation of products;...
Page 21
Templates: BB50 BB81 (ANSI A8112) Steel - Polished and Plated or Bonderized and Prime Coated for Painting. BB21 (ANSI A2112) Brass-Polished and Plated BB51 (ANSI A5112) Stainless Steel-Polished and Satin Finish •For use on medium weight doors or doors requiring low •For hospital type, add HT to suffix of part number.
Page 23
2/5/2015 One Year Finish Warranty ONE YEAR FINISH WARRANTY Subject to the limitations of liability set forth below, PBB, INC., ("Manufacturer") hereby warrants to the original purchaser ("Purchaser") each product ("Products") that were purchased through a Manufacturerauthorized distributor which the Product, when applied in accordance with all Manufacturer instructions and for the purposes intended, will not chip, peel or tarnish for one year following the date of application. This warranty excludes chips, peeling or tarnish caused by scratches or abrasions, incorrect application, misuse, abuse or deterioration of the Product due to the use of paints solvents and other chemicals. THIS IS THE SOLE AND EXCLUSIVE WARRANTY GIVEN BY THE MANUFACTURER WITH RESPECT TO THE PRODUCTS AND IS IN LIEU OF ANY AND ALL OTHER WARRANTTES, EXPRESS OR IMPLIED, ARISING BY OPERATTON OF LAW OR OTHERWISE. ALL IMPLIED WARRANTIES, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, NON INFRINGEMENT AND FITNESS FOR A PARTICULAR PURPOSE ARE HEREBY EXCLUDED, In the event of a failure within the applicable warranty period, Purchaser should send the Manufacturer, at the address set forth below, a written notice which identifies the Product, its application and the nature of the claimed defect. Upon receipt of such notice, Manufacturer will inform Purchaser where to ship the Product, shipping charges prepaid, for examination. In the event that such examination reveals a defect covered by this warranty, Manufacturer will either replace the Product or refund the original purchase price, as determined in Manufacturer's sole discretion. This is the sole and exclusive liability of the Manufacturer under this warranty or otherwise. MANUFACTURER SHALL NOT BE LIABLE FOR DAMAGES CAUSED BY DELAY IN PERFORMANCE AND IN NO EVENT, REGARDLESS OF THE FORM OF THE CLAIM OR CAUSE OF ACTION (WHETHER BASED ON CONTRACT, INFRINGEMENT, NEGLIGENCE, STRICT LIABILITY, OTHER TORT OR OTHERWISE), SHALL MANUFACTURER'S LIABILITY TO PURCHASER AND/OR ITS CUSTOMERS EXCEED THE PRICE PAID BY PURCHASER FOR THE SPECIFIC PRODUCT GIVING RISE TO THE CLAIM OR CAUSE OF ACTION. PURCHASER AGREES THAT IN NO EVENT SHALL MANUFACTURER'S LIABILITY TO PURCHASER AND/OR ITS CUSTOMERS EXTEND TO INCLUDE INCIDENTAL, CONSEQUENTIAL OR PUNITIVE DAMAGES RESULTING FROM USE OF THE PRODUCTS OR ARISING OUT OF ANY BREACH OF THIS WARRANTY. The term "consequential damages" shall include, but not be Iimited to, loss of anticipated profits, business interruption, Ioss of use or revenue, cost or capital or loss of damage to property or equipment. The foregoing limitations and exclusions are intended to be effective to the maximum extent permitted by law. This warranty is governed by the laws of the State of California, without regard to its conflicts of law principles. Manufacturer and Purchaser agree that the United Nations Convention on Contracts for the International Sale of Goods and the United Nations Convention on the Limitation Period in the International Sale of Goods shall not apply to sales of the Products. Mail all warranty claims to: PBB, INC. 1311 E. Philadelphia St., Ontario, CA 91761 *Exceptions USlOB No warranty on Steel Architectural Hinges. US1OB FINISH WARRANTY STATEMENT Note: PBB INC. only warrants US1OB finish over brass or bronze base material. If steel base material is necessary, PBB then recommends US1OA lacquer finish. file:///M:/Project/'15%20Projects%20AZ/15006%20%20Kitchell%20%20St%20Joe's%20%20ALS%20Infusion%20Clinic/Warranty/One%20Year%20Finish%…...
Page 24
LIMITED DOOR VANCOUVER DOOR CO. INC. PERFORMANCE WARRANTY All doors manufactured by Vancouver Door Company Inc., are warranted to be of good material and workmanship and free from defects which render them unserviceable for the ordinary uses for which they are recommended for the period of time as they are stated below. No warranty made herein shall inure to the benefit of any except those purchasing products directly from Vancouver Door Company Inc.
Page 25
LIMITED DOOR VANCOUVER DOOR CO. INC. PERFORMANCE WARRANTY THIS WARRANTY REQUIRES STRICT COMPLIANCE WITH THE HANDLING, FINISHING AND INSTALLATION INSTRUCTIONS AND IS SUBJECT TO TOLERANCE AND EXCLUSIONS ALL STATED HEREIN: HANDLING, FINISHING AND INSTALLATION INSTRUCTION; 1. Store doors flat on a level surface, at least 4” above floor, in a dry, well-ventilated building. Cover to keep clean, but allow air circulation. If doors are to be stored more than a week, all edges should be sealed.