Mitsubishi Electric MJ-E14CG-S1-IT Service Manual page 25

(3)Removing and replacing the front casing assembly
①Remove the water tank.
（Reference:(1)Removing the water
tank)
②Removing the front panel assembly and
air filter.
panel and air filter)
③
front casing assembly setscrews(4).
④
front casing assembly and pull the front
casing assembly toward you so that it is
away from the main unit.
⑤Raise the handle and remove the power
control board box setscrew.
⑥Pull the power control board box toward
(one on each side), and remove the lid.
⑦Remove connectors P100 and P101 from
the power control board and remove the
replacing the front casing assembly)
Power control board box setscrew
⑤
Handle
(4)Removing and replacing the operation control board
①Remove the front casing assembly.
the front casing assembly)
②Detach the catches(bottom:4,right
side:1) to remove the operation control
operation control board)
③
④
Catch(left side:1) Catch(left side:1)
④
Main unit
Power control board box lid
⑥
⑦
Power control board Connectors(P100,P101)
②
Front casing
assembly
Front casing assembly
Front casing assembly
⑦
Catches
Operation control board
Catch
Special setscrews
④
Catch(Right side:1) Catch(Right side:1)
Front casing
assembly setscrews
Catches
25