Mitsubishi Electric MJ-E14CG-S1-IT Service Manual page 23

Wear protective gloves.
Failure to do so may result in injuries
by the edge of metal, electric shock,
and/or burns caused by contact with hot section.
Do not put the unit
where it may burn.
This may cause fire,
or combustion.
Perform operation
check after reassembly.
Failure to do so may result
in an accident or malfunction.
Safety precautions for the inspection and service
1. When the service requires disassembly, be sure to remove the power cord from the outlet.
2. When it is necessary to perform the work with the power on, be careful not to touch the live part.
3. Use appropriate tools for the work.
4. Use the specified parts listed on the "Parts Catalog" of the applicable model.
5. Check the deterioration of the power cord and lead wire at service.
Replace the damaged or deteriorated power cord and lead wire.
6. After the service, perform the operation check.
Verify that the tank full detection works properly and the unit operates without a problem.
CAUTION
Keep children away.
Wear gloves
Failure to do so may result in
electric shock and/or injuries when moving
the unit or using a measuring device.
Check the firmness
of installation location.
Do not
The product may fall down,
install unit
which could cause an accident or injuries.
Do not wash the unit
with water.
Operation
check
This may result in fire,
combustion, or malfunction
Keep away
Check
No water
23