Features - Ness Security Products 5000 SERIES Instruction Manual

****************************************************************************************************
The 5000 SERIES 8 Zone Control
Panel is one pan of an integrated range
of equipment.
4 Access codes.
Monitor mode (partial Arming). Simple
operation allows selected zones to be
Armed while others are ignored. Ideal
for monitoring doors and windows
while you are safe inside.
Additional security is provided by the
various programming options:
- Arm via a code
- Exclude zones via a code
- Indication of zones that are unsecured
when arming.
Special interface to allow the
connection of NESS Remote Keypads
which offer full programmability and
operation of the panel from a remote
location.
Unique keyswitch input to allow simple
remote operation of the Control Panel.
Easy connection of the 5000 SERIES
Satellite Siren to greatly increase the
security of your system.
The Control Panel housing has 4
separate tamper systems - Keypad,
Wall, Lid and Panel impact. The panel
impact tamper system protects against
control panel intrusion by heavy
impacts. These tampers are protected
24 hours a day.
Different siren sound for 24-hour
alarms
Outputs are separately fused.
Unique dynamic input system which will
detect any component failure of the
zone input circuitry and generates an
alarm.
ALL inputs and outputs are heavily
protected against lightning and high
voltage power supply transients. An
earth terminal is provided for extra
protection.
TRUE DYNAMIC BATTERY TEST under
load, every hour and when Arming the
panel. Your system will warn you in
advance of possible battery failure.
Works irrespective of whether the
mains is on or off.
A large 6.5 A-H backup battery and a
1.4 amp plug-pack transformer provides
more than sufficient current to maintain
the operation and security of the entire
system, even under full alarm
conditions.
The mains input is constantly
monitored. A warning is given when the
mains is disconnected.
Audible warnings to indicate trouble
when Arming.
Comprehensive Memory Mode for easy
retrieval of important events such as
Primary Alarms, Secondary Alarms,
Tamper Alarms, Low Battery and Mains
Fail.
All Programming data is permanently
stored in secure non-volatile EEPROM.
3