Winnebago Vista 26P Operator's Manual page 97

NOTE: You may find it easier to remove the
dinette cushions completely before
lowering the table, especially if just one
person is converting the dinette into bed
position.
3. Secure both latches on the table leg to lock in
lowered position.
4. Arrange cushions to cover bed area.
NOTE: The cushions to cover the dining table
section are located under the center
dinette seat (lift removable panel below
seat cushion to access) or you may use
the back dinette seat cushion and two
bolster cushions, depending on model.
FURNITURE AND SOFTGOODS
Reverse steps to reassemble to dinette
configuration.
Round Table Leaf Extension
-If Equipped
Lift the leaf extension upward then reach
beneath the tabletop and slide the support arms
outward to hold the extension. Reverse steps to
lower the extension.
SECTION 9 -
9-5