Winnebago Vista 26P Operator's Manual page 95

2. Remove the table from the wall support
bracket by lifting the end of the table. Then
lower the table to rest on the cleats attached to
each dinette bench.
3. Arrange dinette cushions to cover bed area.
Bed to Dinette
1. Reattach the table onto the wall support and
lower the table leg.
Wall
Support
Table
Bracket
FURNITURE AND SOFTGOODS
2. Make sure that the table leg is secured into the
floor support bracket and the leg brace is
locked.
DINETTE/BED CONVERSION
(Dream Dinette
™
Mechanism)
–If Equipped
(Typical view – your coach may differ)
Dinette to Bed
1. Release the lock rod on the bottom of the
dinette table by turning clockwise (left).
2. Lift the dinette cushions upward and push
table straight down.
SECTION 9 -
Table
9-3