Correcting Time Automatically - Ricoh WG-5 GPS Operating Manual

Correcting Time Automatically

The camera corrects its clock automatically using the time data received from
GPS satellites.
1
Use the four-way controller (23) to select [GPS] in the
[WSetting] menu.
2
Press the four-way controller (5).
The [GPS] screen appears.
3
Use the four-way controller (23) to select [GPS Time Sync].
If this item is grayed out and cannot be selected, set [GPS On/Off] to [On].
4
Press the four-way controller
(5).
The setting of [World Time] is displayed.
5
Use the four-way controller (45)
to switch between [On] and [Off].
6
8
Press the 4 button.
Returns to the [GPS] screen.
• [GPS Time Sync] can be set only when [GPS On/Off] is set to [On].
• The GPS Time Sync function does not work in the following situations:
• During movie recording
• During movie playback
• During slideshow
• When
• When the self-timer is set
208
(Interval Shot) or
GPS
GPS On/Off
GPS Logging
GPS Time Sync
MENU
Destination
New York
Syncs camera time to
current GPS location
Off
MENU
Cancel
(Interval Movie) is set
On
Off
04/04/2015
01:25 DST
OFF OF OFF
Time Dif.
+5:00
OK OK