Recording And Saving A Log - Ricoh WG-5 GPS Operating Manual

Recording and Saving a Log

Obtains GPS information at the interval and for the duration you have set and
records it to the camera as a log.
The recorded log will be saved to the SD Memory Card as a log file (KML format).
Recording a Log at a Set Interval and Duration
1
Use the four-way controller (23) to select [GPS] in the
[WSetting] menu.
2
Press the four-way controller (5).
The [GPS] screen appears.
3
Use the four-way controller (23)
to select [GPS Logging].
If this item is grayed out and cannot be
selected, set [GPS On/Off] to [On].
4
Press the four-way controller (5).
The [GPS Logging] screen appears.
5
Use the four-way controller (23)
to select [Record log], and press
the four-way controller (5).
The [Record log] screen appears.
6
Use the four-way controller (23) to select [Logging Interval],
and press the four-way controller (5).
A pull-down menu appears.
7
Use the four-way controller (23)
to select the logging interval, and
press the 4 button.
GPS
GPS On/Off On
GPS Logging
GPS Time Sync Off
MENU
GPS Logging
Record log
Save log data
Discard log data
MENU
Record log
Starts log recording
Start 15sec.
Logging Interval
30sec.
1min.
Logging Duration
Cancel
MENU
8
OK OK
203