Using The Gps; Preparation For Using The Gps Function - Ricoh WG-5 GPS Operating Manual

Using the GPS

Preparation for Using the GPS Function

Set the [GPS On/Off] to [On] for receiving GPS information (latitude, longitude,
altitude, date and time etc.).
The GPS function needs to be always activated to embed GPS information on an
image (p.201), record it to the camera as a log (p.203), save it to the SD Memory
Card as a log file (p.205), and correct the camera clock automatically (p.208).
1
Use the four-way controller (23) to select [GPS] in the
[WSetting] menu.
2
Press the four-way controller (5).
The [GPS] screen appears.
3
Use the four-way controller (23) to select [GPS On/Off].
4
Press the four-way controller (5).
A pull-down menu appears.
5
Use the four-way controller (23)
to select [Off] or [On].
Off: Does not receive GPS information
On: Receives GPS information
8
• When [GPS On/Off] is set to [On], the camera performs positioning
regularly even while the camera power is off, which reduces the battery life.
Estimated battery life: Approx. 60 hr.
(When receiving GPS information continuously with [GPS On/Off] set to
[On], [Logging Interval] set to [15sec.], and the camera turned off.)
• Before changing the battery, set [GPS On/Off] to [Off].
200
GPS
Off
GPS On/Off
On
GPS Logging
Off
GPS Time Sync
Cancel
MENU
OK
OK