Protecting Images From Deletion (Protect) - Ricoh WG-5 GPS Operating Manual

Protecting Images from Deletion (Protect)

You can protect stored images from being accidentally deleted.
1
Enter Q mode and use the four-way controller (45) to
choose the image you want to protect.
2
Use the four-way controller (2345) to select Z (Protect)
from the Playback Mode Palette.
3
Press the 4 button.
The screen for selecting [Single Image] or [All Images] appears.
4
Use the four-way controller (2) to
select [Single Image].
5
Press the 4 button.
The message [Protects this image] appears.
To protect another image, use the four-way controller (45) to select another
image.
6
Use the four-way controller (2) to
select [Protect].
7
Press the 4 button.
The selected image is protected.
To protect other images, repeat steps 4 to 7.
Select [Cancel] to exit the Protect setting.
• To cancel the protection of the image, select [Unprotect] in step 6.
• Y appears on the protected images during playback.
Single Image
All Images All Images All Images
Cancel Cancel Cancel
OK OK
10 100 - 003 100 - 0038
0038
Protects this image Protects this image Protects this image
Protect
Unprotect
Cancel OK OK
OK OK
4
OK OK OK
OK OK OK
139