Using The Time-Lapse Movie Function - Ricoh WG-5 GPS Operating Manual

• If you set a start delay, a start time corresponding to the current time and
the start delay you set is displayed in real time.
• The total time you can set differs according to the shooting interval you set,
as indicated in the table below.
3
• The Date Imprint function (p.106) is available for Interval Movie mode.

Using the Time-Lapse Movie Function

You can capture frames for fast motion playback.
1
Use the four-way controller (2345) to select c (Time-
Lapse Movie) from the Capture Mode Palette.
2
Press the 4 button.
The camera returns to capture mode.
3
Press the shutter release button fully.
Recording starts. The maximum length of continuous recording time is 25
minutes.
4
Press the shutter release button fully again.
Recording stops.
120
Interval
10 minutes to 5 hours and 59 minutes
1 min.
(in increments of 1 minute)
30 minutes to 29 hours and 55 minutes
5 min.
(in increments of 5 minutes)
1 hour to 59 hours and 50 minutes
10 min.
(in increments of 10 minutes)
3 hours to 179 hours and 30 minutes
30 min.
(in increments of 30 minutes)
1 hr.
Total time that can be set
30 fps
6 hours to 359 hours
(in increments of 1 hour)
0 7 : 3 4 0 7 : 3 4 0 7 : 3 4