Service Manual
Model No:
DH8060P1
6-3 Motor
Unscrew 4 screws on the holder for
bearing.
The bearing can be disassembled.
bearing
1) Disassemble the top cover;
2) Disassemble the control panel;
3) Unscrew 5 screw fastening the
front girder and disassemble it.
1) Unscrew all the screw on the top
back and bottom of the side panel;
2) Pull the side panel upward and
backward and you can remove the
side panel.
-17 -
Issue
Rev.