Restoring Connection With A Smartphone; Smartphone Location Information Settings; Doze Mode - Casio WSD-F10 User Manual

Wi-Fi connectivity
For Android smartphones, you will have access to the greatest number
of watch functions while it is connected to Wi-Fi and the smartphone
is connected to the Internet. However, note that when using a Wi-Fi
connection you need to be aware of the watch's battery level and your
surrounding environment. A low battery or extreme cold can cause Wi-Fi
operation to shut down automatically to protect the watch's system.

Restoring Connection with a Smartphone

In rare cases, you may not be able to re-establish a Bluetooth
connection between the watch and smartphone after the connection is
lost for some reason. If this happens, try restarting both the watch and
smartphone. If this does not solve the problem, perform the procedure
under "Pairing with Another
smartphone, and then perform steps 1 . and 4 . under
again.
Important!
• •
• P erforming•the•procedure•under•"Getting•Ready"•again•after•deleting•
pairing•settings•of•the•watch•and•smartphone,•synchronization•between•
the•watch•and•smartphone•will•take•a•very•long•time.•Perform•this•
procedure•only•when•you•know•you•will•not•need•to•perform•watch•and•
phone•operations•for•some•time.

Smartphone Location Information Settings

To use your smartphone's GPS for distance, speed, area, and other
measurement settings, perform the following operation on your
smartphone: Open Settings, tap Location, use the switch to turn
Location on, and then choose High Accuracy mode.
If your smartphone does not have High Accuracy setting, turn on its
GPS, Wi-Fi, and mobile network (data communication) settings.

Doze Mode

If the watch is left idle for about 30 minutes after you remove it from
your wrist it will enter a Doze mode that performs Android Wear
operations only intermittently in order to conserve battery power. In
Doze mode, the watch displays the current time using a monochrome
LCD screen and minimizes communication with your smartphone.
To recover from Doze mode to normal operation, tap the watch's touch
screen or press its power button.
Smartphone" to unpair the watch and
EN-22
"Getting Ready"