Develop ineo 223 Quick Manual page 151

3.9 Binding with staples and punching holes in copies
When select the Punch setting, specify the position where holes are to be punched.
The number of punched holes varies depending on the country you are in.
Reference
- If the Finishing Program button is used, you can configure the registered finishing functions at one time.
- The following paper can be used with the Staple settings.
Paper weight:
When Finisher FS-527 is installed
Plain Paper (15-15/16 lb to 23-15/16 lb (60 g/m
Thick paper 1/2 (24-3/16 lb to 55-5/8 lb (91 g/m
When Finisher FS-529 is installed
Plain Paper (15-15/16 lb to 23-15/16 lb (60 g/m
Thick paper 1/2 (24-3/16 lb to 55-5/8 lb (91 g/m
*Can be used only as a cover page.
Paper sizes:
When Finisher FS-527 is installed
11 e 17 w to 8-1/2 e 11w/v, A3 w to A5 v
When Finisher FS-529 is installed
11 e 17 w to 8-1/2 e 11w/v, A3 w to B5 v
ineo 223/283/363/423
1
2
2
2 2
to 90 g/m ))
2 2
to 209 g/m ))
2 2
to 90 g/m ))
2 2 *
to 209 g/m ))
3
1
3-23