Develop ineo 223 Quick Manual page 202

5
Quality Adjustment
No. Parameter
1 Background Removal
2 Sharpness
Application
No. Parameter
1 Frame Erase
2 Book Copy
3 Annotation
4 Stamp/Composition
5 Send & Print
6 TX Stamp
d
Reference
For details, refer to chapter 5 of the [User's Guide Network Scan/Fax/Network Fax Operations].
5-16
Scanning the documents to be sent
1
2
Description
Adjust the background density when the print on the back side
may be reproduced on the front side of the copy or when the
original background is colored.
Adjust the setting when the edges of text are not sharp.
1 2
4 5
Description
The shadows that appear when a document is scanned can be
erased.
Specify the appropriate setting for scanning a book.
The document to be sent can be saved in the Annotation User
Box.
This function is available only when a hard disk is installed.
Send the document with the date, time, page number or preset
text added.
A document being faxed can be copied at the same time.
When the fax is to be sent using ADF, whether each page of the
original has been scanned or not can be confirmed by adding
the completion stamp to the scanned original.
In order to use the TX Stamp function, optional stamp unit must
be installed.
3
6
ineo 223/283/363/423
5.5