Develop ineo 223 Quick Manual page 278

Table of Contents

Advertisement

9
Answer
Check for the following.
-
Use the [Brightness] dial in the control panel to adjust the brightness of the screen in the touch panel.
-
Touch the touch panel. There is no problem if the touch panel lights up. When the machine is in Power
Save mode, touching the touch panel or pressing a key in the control panel cancels Power Save mode.
-
Try pressing the [Power Save] key in the control panel. If the weekly timer has set the machine in Sleep
mode, a screen appears in the touch panel when the [Power Save] key is pressed. Enter the information
indicated in the screen to be able to use the machine during non-business hours.
-
Check that the machine has been turned on by using both the sub power switch and the main power
switch.
NOTICE
If no screen appears in the touch panel after the indicated items have been checked, contact your service
representative.
9-4
Troubleshooting
9.1
ineo 223/283/363/423

Hide quick links:

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the ineo 223 and is the answer not in the manual?

This manual is also suitable for:

Ineo 283Ineo 423Ineo 363

Table of Contents