Table of Contents
Advertisement
Remote Speaker/Microphone
The FLN2800A Remote Speaker/Microphone (RSM) provides a convenient
means of communicating by having a speaker, a microphone, and a Push-to-
Talk (PTT) button in a single, hand-held or clip-on accessory. The RSM also
includes a 3.5 mm audio jack (located on the opposite side of the PTT) to accept
secondary receiver audio accessories.
PTT Button
Speaker /
Microphone
Attaching and Removing the Swivel Clip
To attach the swivel clip to the remote speaker/
microphone:
1.
Position the clip with the release tab pointing
upward and align the metal plate edges of the
swivel clip with the plastic slots on the RSM's rear
housing.
2.
While holding the clip open, slide the metal plate
in and push down firmly until the parts snap
together.
To remove the swivel clip from the remote speaker/
microphone:
1.
Carefully push the flat blade of a #2 slotted screw-
driver (or similar instrument) between the RSM's
housing and the swivel clip's metal release tab, as
shown in the figure.
2.
While performing step 1, push the swivel clip toward the top of the RSM.
3.
As the release tab disengages, remove the screwdriver and pull the swivel
clip completely away from the unit.
Connecting the Remote Speaker/Microphone to the Portable
To attach the accessory connector, position the portable so that it faces you.
Optional Accessories
3.5mm Audio Jack
Accessory
Connector
65
Advertisement
Table of Contents
