Table of Contents
Advertisement
Sending a Status Message
After selecting both a Status Message and a desired target ID, press the PTT
button to send the message. Two high pitched tones will be heard during
transmission.
If successful, two high pitched tones will be heard to
indicate the message was successfully delivered to the
target portable.
If unsuccessful, an alert tone will be heard to indicate
that the targeted unit is busy, out-of-range, or turned-off.
In either case, the portable will return to the status
screen after 3 seconds.
Exiting the Status Message Function
Press the m key to exit the Status Message screen. Pressing the "Exit" option
key from the Status Message screen will also allow you to exit the status
message function.
Receiving a Status Message
The portable will receive a message along with alert
tones. To silence the recurring alert tones only, press
any key except m or the "Clear" option key. In case of
a non-aliased sender ID, the Quickstore option is
available.
If a non-aliased ID is sent, the Quickstore softkey is
displayed.
All calls remain blocked until this message is cleared.
ID List Programming
Feature menu #26 allows you to program ten status
messages, each up to 12 characters long.
Advanced Features
a
a
a
a
b
b
b
b
41
Advertisement
Table of Contents
