Option
Date/Time
Table 3. System Configuration
Option
Integrated NIC
Parallel Port
Serial Port
SATA Operation
34
Description
NOTE: Without this option, only
UEFI option ROMs will load. This
option is required for Legacy boot
mode. This option is not allowed if
Secure Boot is enabled.
•
Enable Legacy Option ROMs
Allows you to set the date and time.
Description
Allows you to configure the integrated
network controller. The options are:
•
Enable UEFI Network Stack
•
Disabled
•
Enabled
•
Enabled w/PXE (Default Setting)
Allows you to define and set how the
parallel port on the docking station
operates. You can set the parallel port
to:
•
Disabled
•
AT (Default Setting)
•
PS2
•
ECP
Identifies and defines the serial port
settings. You can set the serial port to:
•
Disabled
•
COM1 (Default Setting)
•
COM2
•
COM3
•
COM4
NOTE: The operating system may
allocate resources even if the
setting is disabled.
Allows you to configure the internal
SATA hard-drive controller. The options
are:
•
Disabled
•
AHCI
•
RAID On (Default Setting)
NOTE: SATA is configured to
support RAID mode.