Dell Precision 15 7000 Series 7510 Owner's Manual page 38

Option
Non-Admin Setup Changes
TPM 1.2 Security
Computrace(R)
CPU XD Support
OROM Keyboard Access
Admin Setup Lockout
38
Description
Allows you to determine whether changes to setup option are
permitted when an administrator password is set. This option is disabled
by default.
• Allows Wireless Switch Changes
This option lets you control whether the Trsuted Platform Module
(TPM) in the system is enabled and visible to the operating system.
When disabled the BIOS will not turn On the TPM During POST. The
TPM will be non-functional and invisible to the operating system. When
enabled, the BIOS will turn On the TPM during POST so that it can be
used by the operating system.
NOTE: Disabling this option does not change any settings you may
have made to the TPM, nor does it delete or change any
information or keys you may have stored there. It simply turns Off
the TPM so that it cannot be used. When you re-enable this option,
the TPM will function exactly as it did before it was disabled. This
option is enabled by default.
NOTE: Changes to this option take effect immediately.
• TPM On
• Clear
• PPI Bypass for Enable Commands
• PPI Bypass for Disable Commands
Allows you to activate or disable the optional Computrace software The
options are:
• Deactivate (Default Setting)
• Disable
• Activate
NOTE: The Activate and Disable options will permanently activate
or disable the feature and no further changes will be allowed
Allows you to enable the Execute Disable mode of the processor.
Default Setting: Enable CPU XD Support
Allows you to set access to enter the Option ROM Configuration
screens using hotkeys during boot process. The options are:
• Enable (Default Setting)
• One Time Enable
• Disable
Allows you to prevent users from entering Setup when an Administrator
password is set.
Default Setting: Disabled