1
Display w/Touch SRN
2
Speaker (built-in)
3
Front OSD Control Buttons
4
Wireless indicator LED
5
Power indicator LED
6
Stand Module
7
Cable Cover
8
Expansion Module (Optional)
9
Edge USB port (Accessory KITs)
10 Kensington Lock
11 Power Connector (DC-IN)
1. Display w/Touch SRN
The main display with different touch screen solution is made by two different sizes, 15-inch,
17-inch. The touch technology is defined as below touch type for composition of the system.
- A ccuTouch ("no-bezel" resistive).
- I ntelliTouch zero-bezel (zero-bezel multi-touch surface acoustic wave).
- I ntellitouch (single-touch surface acoustic wave).
- I ntelliTouch Pro PCAP (projective capacitive).
The main display of 20X width models are defined as below touch type for composition of the
system.
- I ntelliTouch Pro PCAP (projective capacitive).
2. Speaker (built-in)
The integrated speaker provides audio output for video and music playback.
3. Front OSD Control Buttons
The front OSD control buttons provide the OSD functions control.
4. Wireless indicator LED
Flashes blue when the X-Series is connected to a Wi-Fi network and flashes blue when the
X-Series Bluetooth is on.
5. Power indicator LED
The power indicator LED is to show the state of the touchcomputer. The table below shows LED
state and corresponding colors.
6. Stand Module
The stand module is a strong design to support all 15-inch, 17-inch and 20-inch Elo A ll-In-One
Touchcomputers.
12 +24V Powered USB Port (X3/X5/X7 only)
13 Serial Port (COM1/RS-232)
14 VGA Output (D-Sub)
15 USB 3.0 Port
16
17 Ethernet LAN Port
18 Serial Port (COM2/RJ-45)
19 Audio Port (Line-out)
20 Front USB Port
21 Microphone (built-in)
22 Cable Exit Hole
USB 2.0 Port (X2/X3)
USB 3.0 Port (X5/X7)
User Manual: X-Series Rev A AiO Touchcomputer
SW602213 Rev B, Page 9 of 53