7. Cable cover
Open the back cable cover to access the system IO function ports.
8. Expansion Module (Optional)
The expansion module is an option kit for additional functions of X-Series. Pls reference the
Expansion Module section for function description in detail below.
9. Edge USB Port (Accessory KITs - connection)
The edge USB port is design for X-Series optional A ccessory KITs;; the accessory kits can be
mounted and fixed at the edge for additional function requirement.
10. K ensington Lock
Kensington Lock is a standard anti-theft device for X-Series to protect and keep the unit safe.
11. P ower Connector (DC-IN)
Plug the DC cable of the A C/DC power adapter kit into the power connector to power up the
X-Series system.
12. + 24V Powered USB Port (X3 / X5 / X7 only)
The +24V Powered USB Port spec is design for X3/X5/X7 configuration only. The maximum
power rating of the +24V Power USB would limit to 24V@2A specification.
13. S erial Port (COM1/RS-232)
The serial port is a standard native RS-232 interface for connection.
14. V GA Output (D-Sub)
The X-Series system has a VGA output (D-Sub) to support 2
15. U SB 3.0 Port
The X-Series system has two standard Super Speed USB 3.0 ports at rear IO side.
16. U SB Port Configuration
- T wo USB 2.0 Ports for X2 / X3 system configuration only.
- T wo USB 3.0 Ports for X5 / X7 system configuration only.
17. E thernet LAN Port
The Ethernet LAN Port has 1Gbps speed capability for network of the X-Series.
nd
display monitor.
User Manual: X-Series Rev A AiO Touchcomputer
SW602213 Rev B, Page 10 of 53