Table of Contents
Advertisement
Barcode Reader KIT (E267080)
You can optionally add a BCR KIT to the X-Series touchcomputer to any of the three mounting
locations located on the display head top, left, and right of the touchcomputer
The BARCODE SCANNER peripheral shall consist of a mechanical housing, which encloses a
BARCODE SCANNER electrical module. The BARCODE SCANNER peripheral shall have a
USB connection to interface with the X-Series touchcomputer.
Feature
Light Source
Optical sensor
Resolution
Depth of Field
PCS
Interface type
Voltage
Power
Standby currents
Scanning Speed
Operating temperature
Storage temperature
Humidity
Ambient Light
BCR allocation on X-Series
Spec Description
660nm visible LED
2500 pixels Toshiba CCD sensor
3 mil
35 – 320mm
30% or more
USB HID / RS-232 (TTL)/ KBW
+ 5V DC ± 5%
120mA @ 5VDC (typ.)
20 ~ 30 mA
Up to 270 scans/sec
0 °C to 55 °C
-20 °C to 60 °C
10% ~90% RH (non-condensing)
Works in any lighting conditions, from 0 to 10,000 lux
User Manual: X-Series Rev A AiO Touchcomputer
SW602213 Rev B, Page 42 of 53
Advertisement
Table of Contents
