Table of Contents
Advertisement
• POLE MOUNT STAND KIT (E038989)
- The Pole Mount Stand support 7"~15" customer display and different portable
• WALL MOUNT KIT (E143088)
- The WALL MOUNT KIT is design for system can be mounted at wall through two
• Barcode Scanner Reader KIT (E267080)
- The Barcode Scanner Reader KIT is design with USB interface for all X-Series
Biometric Fingerprint Reader KIT (E001001)
You can add a fingerprint reader to the X-Series touchcomputer to any of the three mounting
locations located on the display head top, left, and right. Software application and drivers can
be found in the following directory or on www.elotouch.com
C:\EloTouchSolutions\Peripherals
The fingerprint reader is powered by the USB bus. The reader optically scans the fingerprint
when the user touches the glowing window. Optical technology gives the highest quality
fingerprint scans and reliability.
Fingerprint reader specifications are shown in the table below.
Feature
Power supply
Power consumption
Current draw – scanning mode
Current draw – idle mode
Current draw – suspend mode
Image resolution
Image color
Scan capture size
Image capture speed
Interface type
Operating temperature
Storage temperature
ESD Susceptibility
devices w/VSESA mount (75x75mm) spec.
mental frames.
configurations.
Spec Description
5.0VDC +/- 5%
< 1.0 W
< 100 mA
< 120 mA
< 0.5 mA
Up to 512 dpi or higher resolution.
8-bit grayscale (256 levels of gray)
14.6mm (nominal width) x 18.1mm (nominal
length)
100 ms or higher.
USB 2.0 (Compatible with 1.0 / 1.1)
0 to 40°C
-10 to 60°C
>15KV.
User Manual: X-Series Rev A AiO Touchcomputer
SW602213 Rev B, Page 31 of 53
Advertisement
Table of Contents
