Install Fixed Glass Assembly; Install Optional Trim Kits - Heat & Glo SL-550F-LP Installation Manual

E. Install Fixed Glass Assembly
WARNING! Risk of Asphyxiation! Handle fi xed glass
assembly with care. Inspect the gasket to ensure it is
undamaged and inspect the glass for cracks, chips or
scratches.
• DO NOT strike, slam or scratch glass.
• DO NOT operate fi replace with glass removed, cracked,
broken or scratched.
• Replace as a complete assembly.
• Replace the glass door on the appliance. Pull out and
latch the four glass assembly latches into the groove
on the glass frame. See Figure 11.1.
F. Install Optional Trim Kits
• Install optional trim kits and/or surrounds using the
instructions included with the accessory.
• Use non-combustible materials to cover the gap between
the sheet rock and the appliance (when applicable to
model).
Heat & Glo • SL-550F, SL-750F Installation Manual • 2297-980 Rev. H • 3/16 55