Heat & Glo SL-550F-LP Installation Manual page 51

Log Set Assembly: LOGS-750F
Models: SL-750F, SL-750F-LP
3 3
4 4
2 2
Figure 1.
CAUTION: Logs are fragile, handle with care. Log #1 (2298-700): Place Log #1 into position by holding it upright and
placing it onto the pins on the back of the basepan. See Figure 3. Log #1 will sit upright as shown in Figure 4.
HOLES FOR LOG LOCATION PINS HOLES FOR LOG LOCATION PINS
Figure 3. Log #1 - Bottom View
Log #2 (2033-709): Log #2 is used twice in this log set. Log #2 also has holes on the bottom side that will be used for
positioning them in the fi rebox. See Figure 5. Locate the two Log #2's and place them on the pins in the front of the fi rebox
as shown in Figure 6 and Figure 7.
Figure 5. Log #2 - Bottom View
1 1
4 4
2 2
Heat & Glo • SL-550F, SL-750F Installation Manual • 2297-980 Rev. H • 3/16
LOG PLACEMENT INSTRUCTIONS
3 3
3 3
2 2
Figure 2. Location of Log Placement Pins and Corresponding Log #'s
Figure 4. Log #1 in Position
Figure 6. Log #2 - First of Two in Position
LOG PLACEMENT PINS LOG PLACEMENT PINS
(CIRCLED) (CIRCLED)
1 1 1 1
2 2
2 2
1 1
1 1
2 2
2 2 3 3
51