Advertisement
1
2
3
4
1....LED day time reduction
2....Display desired set temperature
3....LED heating On / Off
4....LED night time reduction
[F] ..Function button
[+] ..Button +
[–]...Button –
[5]...Button day time reduction
[7]...Button night time reduction
14
Changing day time reduction (duration and
temperature) permanently
While pressing [F], press twice on [5].
"h" (hours) will flash. The set reduction period will flash
afterwards (e. g. 06 = 6 hours).
Press the [+] / [–] buttons to change the reduction pe-
riod.
Confirm by pressing [F]
"d" lights up briefl . The set weekday will flash after-
wards.
Use the [+] / [–] buttons to change the day of the week
(Monday = 1, Tuesday = 2, etc.).
Confirm by pressing [F]
The set reduction temperature will flash
Press the [+] / [–] buttons to change the reduction tem-
perature.
Confirm by pressing [F]
The set reduction temperature lights up, while the
green LED (1) flashes to indicate that the day time re-
duction has been activated.
Deleting the reduction permanently
Keep pressing [5] (day time reduction) or [7] (night time
reduction) until the green LED goes out. The comfort
temperature lights up.
OFfice mod
Beginning of the reduction
Three hours prior to the desired start of the reduction
period, press the [7] button until "h" (hours) starts flas -
ing. "12" (12 = 12 hours) will flash afterwards
Use the [+] / [–] buttons to set the duration for the re-
duction in hours.
Confirm by pressing [F]
"d" lights up briefl . "1" will flash afterwards
Use the [+] / [–] buttons to set the correct day of the
week (Monday = 1, Tuesday = 2, etc.).
Confirm by pressing [F]
"17" (°C) will flash
Press the [+] / [–] buttons to set the reduction tempera-
ture.
Confirm by pressing [F]
The comfort temperature will be lit for the next 3 hours
until the reduction sets in, while the green LED (4) indi-
cates that the reduction has been activated.
This process is repeated on all weekdays. The reduc-
tion will last for 24 hours on Saturdays and Sundays.
Changing the current temperature once
Press the [+] / [–] buttons to set the desired tempera-
ture.
The temperature change will only apply until the next
period begins.
Advertisement
