General points Important notes Olsberg electric convector units can be used in many • Olsberg electric convector units are designed to different direct-heating applications. Their elegant conform to all relevant safety standards and regu- shape, ease of operation, high heating capacity and lations.
Wall installation IMPORTANT: DO NOT install the device directly be- neath a wall-mounted power socket. Fit the wall-fixing bracket (fig. 1) in such a way that the convector unit lies in a horizontal position when in- stalled. The attachment bracket should be fixed to a level wall surface.
Electrical connection • The device MUST NOT be opened during the in- stallation or connection process. • Connect the cable to the power supply 230V to put the heating unit into standby mode. • DO NOT run the cable lead across or above the air outlet grille.
Care and maintenance • Olsberg electric convector units do not require any specific maintenance. • If the unit is operating in places where there is an excess of dust, you are recommended to clean the air inlet and outlet grilles from time to time, using a vacuum-cleaner nozzle attachment to remove any dust deposits.
Conditions of Guarantee For guarantee please refer to the respective terms and conditions of supply for your country. The installation, electrical connection and first opera- tion of this appliance should be carried out by a quali- fied installer. The company does not accept liability for failure of any goods supplied which are not installed in accor- dance with the manufacturer's instructions.
Page 8
Olsberg GmbH Hüttenstraße 38 59939 Olsberg T +49 2962 805-0 F +49 2962 805-180 info@olsberg.com olsberg.com...