Advertisement
If no comfort temperature has been set, 22 (°C) will
automatically be saved after 7 seconds.
Please note that if the product for some reason has
been reset to factory default the procedure will be as
from the *-mark in the above.
HOme mode
Beginning of night time reduction
Keep pressing the [7] button until "h" (hours) starts
flashing and set the time at which the night time reduc-
tion is supposed to begin. "07" (07 = 7 hours) will flash
afterwards.
Use the [+] / [–] buttons to set the duration of the night
time reduction in hours.
Confirm by pressing [F]
°C flashes 3 times. "17" (°C) will flash afterward
Press the [+] / [–] buttons to set the reduction tempera-
ture.
Confirm by pressing [F]
The set reduction temperature lights up, while the
green LED (4) flashes to indicate that night time reduc-
tion has been activated.
The temperature will be lowered for the number of
hours you set. This process will be repeated every
evening at the same time.
Beginning of day time reduction
Keep pressing the [5] button until "h" (hours) starts
flashing and set the time at which the day time reduc-
tion is supposed to begin. "05" (05 = 5 hours) will flash
afterwards.
Use the [+] / [–] buttons to set the duration of the day
time reduction in hours.
Confirm by pressing [F]
"d" lights up briefl . "1" will flash afterwards
Use the [+] / [–] buttons to set the correct day of the
week (Monday = 1, Tuesday = 2, etc.).
Confirm by pressing [F]
"17" (°C) will flash
Press the [+] / [–] buttons to set the reduction tempera-
ture.
Confirm by pressing [F]
The set reduction temperature lights up, while the
green LED (1) flashes to indicate that the day time re-
duction has been activated.
The temperature will be lowered for the number of
hours you set. This process is repeated on all week-
days. Day time reduction will not take place on Satur-
days and Sundays.
Suspending the reduction period once
While pressing [F], press the buttons [7] (night time re-
duction) or [5] (day time reduction) once to suspend the
currently active or subsequent reduction period. While
the reduction period is suspended, the LEDs (1) or (4)
and the comfort temperature will be on. The reduction
will be activated again starting with the subsequent pe-
riod.
Changing the current temperature once
Press the [+] / [–] buttons to set the desired tempera-
ture.
The temperature change will only apply until the next
period begins.
Changing the comfort temperature permanently
Press the [+] / [–] buttons to set the desired tempera-
ture while in comfort temperature mode.
Keep pressing [F] until the comfort temperature flashes
briefl . The selected comfort temperature has been
changed permanently.
Changing the reduction temperature permanently
Press the [+] / [–] buttons to set the desired tempera-
ture while in the respective reduction mode.
Keep pressing [F] until the reduction temperature
flashes briefl . The selected reduction temperature has
been changed permanently.
Changing night time reduction (duration and
temperature) permanently
While pressing [F], press twice on [7].
"h" (hours) will flash. The set reduction period will flash
afterwards (e. g. 06 = 6 hours).
Press the [+] / [–] buttons to change the reduction pe-
riod.
Confirm by pressing [F]
°C flashes 3 times. The set reduction temperature will
flash afterwards
Press the [+] / [–] buttons to change the reduction tem-
perature.
Confirm by pressing [F]
The set reduction temperature lights up, while the
green LED (4) flashes to indicate that night time reduc-
tion has been activated.
13
Advertisement
