Step 2: Connecting The Audio Cords - Sony DVP-K370 Service Manual

QQ
3 7 63 1515 0

Step 2: Connecting the Audio Cords

Refer to the chart below to select the connection that best suits your system. Be sure to also read
the instructions for the components you wish to connect.
Select a connection
Select one of the following connections,
Components to be connected
TV
• Surround effects: TVS DYNAMIC (page 52),
TVS WIDE (page 52)
Stereo amplifier (receiver) and two speakers
• Surround effects: TVS STANDARD (page 52)
or
MD deck/DAT deck
• Surround effects: none
AV amplifier (receiver) having a Dolby*
Surround (Pro Logic) decoder and 3 to 6
speakers
• Surround effects: Dolby Surround (Pro Logic)
(page 74)
AV amplifier (receiver) with a digital input jack
having a Dolby Digital, MPEG audio, or DTS**
decoder and 6 speakers
• Surround effects: Dolby Digital (5.1ch) (page 74),
DTS (5.1ch) (page 74), MPEG audio (5.1 ch)
(page 74)
* Manufactured under license from Dolby
Laboratories. " Dolby," " Pro Logic," and the
double-D symbol are trademarks of Dolby
Laboratories.
** " DTS" and " DTS Digital Out" are trademarks
of Digital Theater Systems, Inc.
TE
L 13942296513
20
Connecting to a stereo amplifier (receiver) and 2 speakers/Connecting to
B
an MD deck or DAT deck
If the stereo amplifier (receiver) has audio input jacks L and R only, use
(receiver) has a digital input jack, or when connecting to an MD deck or DAT deck, use
In this case, you can also connect the player directly to the MD deck or DAT deck without using
your stereo amplifier (receiver).
CD/DVD player
DIGITAL OUT
COAXIAL OPTICAL
PCM/DTS/MPEG
DOLBY DIGITAL
B-2
DIGITAL OUT
Coaxial digital
cord (not supplied)
COAXIAL OPTICAL
PCM/DTS/MPEG
DOLBY DIGITAL
to DIGITAL OUT
(COAXIAL or OPTICAL)
Optical digital cord
(not supplied)
Remove jack cap
before connecting
to coaxial or optical
digital input
[Speakers]
Front (L)
Front (R)
l: Signal flow
www
z Hint
B-1
In connection , you can use the supplied
audio/video cord instead of using a separate stereo
audio cord.
.
22
http://www.xiaoyu163.com
through .
A D
Connection Your setup
(page 21) example
A
B (page 22) example
C (page 23) example
(page 24) example
D
B-1 . If the amplifier
LINE OUT S VIDEO COMPONENT
OUT VIDEO OUT
AUDIO VIDEO Y
R L
1 C B
2 C
R
Stereo audio cord
(not supplied) LINE OUT
(white)
AUDIO
R
1
or
or
(red)
2
to LINE OUT L/R (AUDIO) 1 or 2
(white) (red)
to audio input
Stereo amplifier (receiver)
MD deck/DAT deck
Note
x ao
If you select one of the TVS effects (page 51) while
y
playing a disc, no sound will come from your
speakers with the connection.
B-2
i
http://www.xiaoyu163.com
8
A Connecting to your TV
This connection will use your TV speakers for sound.
A
1
2
to LINE OUT L/R
(AUDIO) 1 or 2
l : Signal flow
* The yellow plug is used for video signals (page
18).
z Hint
When connecting to a monaural TV, use a stereo-
mono conversion cord (not supplied). Connect the
LINE OUT L/R (AUDIO) 1/2 jacks to the TV's
audio input jack.
Q Q
3 6 7 1 3
Connecting to an AV amplifier (receiver) having a Dolby Surround (Pro
C
Logic) decoder and 3 to 6 speakers
You can enjoy the Dolby Surround effects only when playing Dolby Surround audio or multi-
B-2 . channel audio (Dolby Digital) discs.
If your amplifier (receiver) has L and R audio input jacks only, use
(receiver) has a digital input jack, use
B-1
C-2
DIGITAL OUT
COAXIAL
PCM/DTS/MPEG
VIDEO
DOLBY DIGITAL
L
to DIGITAL OUT
(COAXIAL or OPTICAL)
Optical digital cord
(not supplied)
Remove jack cap
before connecting
to coaxial or optical digital
input
[Speakers]
Rear (L)
l: Signal flow
Note
When connecting 6 speakers, replace the monaural
u163
rear speaker with a center speaker, 2 rear speakers
and a subwoofer.
.
1-5
2 9 9 4 2 8
CD/DVD player
DIGITAL OUT LINE OUT S VIDEO COMPONENT
OUT VIDEO OUT
COAXIAL OPTICAL AUDIO VIDEO Y
PCM/DTS/MPEG R L
DOLBY DIGITAL
1 C B
2 C R
LINE OUT
(yellow)* (yellow)
AUDIO VIDEO
R L
(white)
(white)
(red) (red)
Audio/video
cord (supplied)
to audio input
1 5 0 5 8 2 9 9 4
.
C-2
CD/DVD player
DIGITAL OUT LINE OUT S VIDEO COMPONENT
OUT VIDEO OUT
COAXIAL OPTICAL AUDIO VIDEO Y
PCM/DTS/MPEG R L
DOLBY DIGITAL
1 C B
2 C R
Stereo
Coaxial digital cord audio cord (not
(not supplied)
supplied) (white)
OPTICAL
or or
(red)
to LINE OUT L/R (AUDIO) 1 or 2
(white) (red)
to audio input
Amplifier (receiver) with Dolby
Surround decoder
Rear (R)
Subwoofer Center Rear (mono)
m
co
9 9
TV
2 8 9 9
, continued
21
C-1 . If your amplifier
C-1
LINE OUT
AUDIO VIDEO
R L
1
2
[Speakers]
Front (L) Front (R)
, continued
23