Step 3: Connecting The Power Cord; Step 4: Quick Setup - Sony DVP-K370 Service Manual

QQ
3 7 63 1515 0
D Connecting to an AV amplifier (receiver) with a digital input jack having
a Dolby Digital, MPEG audio or DTS decoder and 6 speakers
This connection will allow you to use the Dolby Digital, MPEG audio or DTS decoder function
of your AV amplifier (receiver). You are unable to enjoy the surround sound effects of this
player.
CD/DVD player
DIGITAL OUT LINE OUT S VIDEO COMPONENT
OUT VIDEO OUT
COAXIAL OPTICAL AUDIO VIDEO Y
PCM/DTS/MPEG R L
DOLBY DIGITAL
1 C B
2 C R
COAXIAL
to DIGITAL OUT
(COAXIAL or
OPTICAL)
Coaxial digital cord
(not supplied)
to coaxial digital
input
[Speakers]
AV amplifier (receiver) having
a decoder
Rear (L) Subwoofer
Rear (R)
l: Signal flow
Note
After you have completed the connection, be sure to
set " DOLBY DIGITAL" to " DOLBY DIGITAL"
and " DTS" to " ON" in Quick Setup (page 25). If
your AV amplifier (receiver) has an MPEG audio
TE
L 13942296513
decoder function, set " MPEG" to " MPEG" (page
70).
24
Is this player connected to an amplifier
(receiver) ? Select the type of jack you
are using.
YES
LINE OUTPUT L/R (AUDIO)
DIGITAL OUTPUT
NO
9
Press X/x to select the type of jack
(if any) you are using to connect to
an amplifier (receiver), then press
ENTER.
Choose the item that matches the audio
connection you selected on pages 21 to
24 ( through ).
D
A
A
• If you connect just a TV and nothing
else, select " NO." Quick Setup is
finished and connections are complete.
B-1 C-1
• Select " LINE OUTPUT L/R
(AUDIO)." Quick Setup is finished and
connections are complete.
B-2 C-2 D
• Select " DIGITAL OUTPUT." The Setup
Display for " DOLBY DIGITAL" appears.
10
Press X/x to select the type of
Dolby Digital signal you wish to
send to your amplifier (receiver).
Choose the signal that matches the audio
connection you selected on pages 22 to
24 ( B through D ).
AUDIO SETUP
AUDIO ATT: OFF
AUDIO DRC: STANDARD
DOWNMIX: DOLBY SURROUND
DIGITAL OUT:
ON
DOLBY DIGITAL: D-PCM
MPEG: D-PCM
DTS: DOLBY DIGITAL
www
B-2 C-2
• D-PCM (page 70)
D
• DOLBY DIGITAL (only if the
amplifier (receiver) has a Dolby Digital
.
decoder) (page 70)
26
http://www.xiaoyu163.com
D
DIGITAL OUT
OPTICAL
PCM/DTS/MPEG
DOLBY DIGITAL
or
Optical digital cord
(not supplied)
Remove jack cap
before connecting
to optical digital input
[Speakers]
Front (L) Center
Front (R)
11
Press ENTER.
" DTS" is selected.
AUDIO SETUP
AUDIO ATT: OFF
AUDIO DRC: STANDARD
DOWNMIX:
DOLBY SURROUND
DIGITAL OUT: ON
D-PCM
DOLBY DIGITAL:
MPEG: PCM
DTS: OFF
OFF
ON
12
Press X/x to select whether or
not you wish to send a DTS signal
to your amplifier (receiver).
Choose the item that matches the audio
connection you selected on pages 22 to
24 ( through ).
B D
B-2 C-2
• OFF (page 70)
D
• ON (only if the amplifier (receiver) has
a DTS decoder) (page 70)
13
Press ENTER.
Quick Setup is finished. All connections
and setup operations are complete.
If your AV amplifier (receiver) has an
MPEG audio decoder, adjust the
" MPEG" setting (page 70).
Enjoying the surround sound
effects
To enjoy the surround sound effects of this
player or your amplifier (receiver), set the
following items as described below for the
audio connection you selected on pages 22 to
24 ( through ). Each of these is the
B D
default setting and does not need to be adjusted
when you first connect the player. Refer to
page 64 for using the Setup Display.
Audio Connection (pages 21 to 24)
x ao
A
y
• No additional settings are needed.
B-1 C-1
• Set " DOWNMIX" to " DOLBY
i
SURROUND" (page 69)
http://www.xiaoyu163.com
8

Step 3: Connecting the Power Cord

Plug the player and TV power cords into an AC outlet (mains).

Step 4: Quick Setup

Follow the steps below to make the minimum number of basic adjustments for using the player.
To skip an adjustment, press >. To return to the previous adjustment, press ..
./>
X/x
1
Turn on the TV.
2
Press [/1.
3
Switch the input selector on your
TV so that the signal from the
player appears on the TV screen.
" Press [ENTER] to run QUICK SETUP"
appears at the bottom of the screen. If this
message does not appear, select
" QUICK" under " SETUP" in the Control
Menu to run Quick Setup (page 65).
4
Press ENTER without inserting a
disc.
The Setup Display for selecting the
language used in the on-screen display
appears.
Q Q
3 6 7 1 3
• If the sound distorts even when the volume
is turned down, set " AUDIO ATT" to " ON"
(page 69)
B-2 C-2 D
• Set " DOWNMIX" to " DOLBY
SURROUND" (page 69)
• Set " DIGITAL OUT" to " ON" (page 69)
u163
.
1-6
2 9 9 4 2 8
LANGUAGE SETUP
OSD: ENGLISH
[/1
MENU: ENGLISH
AUDIO: CHINESE1
SUBTITLE: CHINESE2
5
Press X/x to select a language.
The player uses the language selected
here to display the menu and subtitles as
well.
ENTER
6
Press ENTER.
The Setup Display for selecting the
aspect ratio of the TV to be connected
appears.
SCREEN SETUP
TV TYPE:
COLOR SYSTEM:
SCREEN SAVER: 4:3 LETTER BOX
BACKGROUND: 4:3 PAN SCAN
7
Press X/x to select the setting that
matches your TV type.
N If you have a wide-screen TV or a 4:3
standard TV with a wide-screen mode
• 16:9 (page 66)
N If you have a 4:3 standard TV
• 4:3 LETTER BOX or 4:3 PAN SCAN
(page 66)
8
Press ENTER.
The Setup Display for selecting the type
of jack used to connect your amplifier
1 5 0 5 8 2 9 9 4
(receiver) appears.
, continued
m
co
9 9
16:9
16:9
2 8 9 9
25
27