Operation; Headset Operation Making A Call - AT&T TL7610 User Manual

Operation

Headset operation
Making a call
Using the headset base as a stand-alone
product (installation option 2):
• In order to make calls, you need to have a
telephone which is already plugged into the
same telephone line or a dial pad (TL7601, sold
separately).
When the headset base is plugged into the
telephone wall jack (installation option 1 or 2):
NO LIFTER MODE must be selected on the
headset base (see page 11).
1. Follow the instructions in your telephone user's
manual for making calls.
2. Press ON/OFF on the headset at any time to join
the call.
3. After you join the call on the headset, you can
hang up the telephone and continue the call on
the headset.
When the headset base is connected to
a multiple line or digital business corded
telephone (installation option 3):
LIFTER MODE must be selected on the headset
base (see page 11).
1. Lift the corded handset from the telephone cradle.
2. Follow the instructions in your telephone user's
manual for making calls.
3. Press ON/OFF on the headset at any time to
switch to the headset.
4. The handset must be out of the cradle (not
hung up) until you are ready to end your call.
22