Installation (Tl7610) - AT&T TL7610 User Manual

Getting started
Headset base installation
Option 3: Headset base with corded phone for
multiple line system or digital business system

installation (TL7610)

With this installation, you can make and receive calls using the
LIFTER MODE without a lifter.
1.
Plug the small end of
the headset base power
adapter into the POWER
jack (green dot) at the
back of the headset
base.
2.
Plug the headset
base power adapter
into an electrical
outlet not controlled
by a wall switch.
DSL filter (not
included) is required
if you have DSL
high-speed Internet
service.
7.
Plug the other end
of the telephone
line cord into a
telephone jack.
4.
Plug one end of
the 4-conductor
telephone line cord
into the BASE JACK
(orange dot) on the
headset base.
6.
Plug one end of the
telephone line cord into the
telephone jack of the corded
phone.
10
3.
Unplug the curly
handset cord from
the telephone. Plug
the end of the curly
handset cord into the
CURLY CORD
(light blue dot) jack on
the headset base.
Curly handset
cord
5.
Plug the other end
of the 4-conductor
telephone line cord into
the handset jack of the
corded phone.