Advertisement
C L E A N I N G / M A I N T E N A N C E
CLEANING/MAINTENANCE
INSTRUCTIONS
Follow these instructions to correctly and safely care for
your stand fan. Please remember:
• Always unplug the fan before cleaning or
disassembling.
• Do not allow water to drip on or into the fan motor
housing.
• Do not use any of the following as a cleaner:
gasoline, thinner, benzene.
(See instructions for fan head assembly)
1. To access the fan blade, remove the front grill and
the fan blade nut.
2. Clean the fan blade, both front and rear grills with a
soft cloth moistened with a mild soap solution.
3. Replace blade, tighten the fan blade nut, and
securely fasten the front grill.
Fan Head, Base and Pole Cleaning
Using a soft, moist cloth, with or without a mild soap
solution, carefully clean the fan base, pole, and head.
Please use caution around the motor housing area. Do
not allow the motor or other electrical components to be
exposed to water.
© 2011 Sunbeam Products, Inc. doing business as Jarden Consumer Solutions. All rights reserved. Imported and
distributed by Sunbeam Corporation (Canada) Limited doing business as Jarden Consumer Solutions, 20B Hereford
Street, Brampton, Ontario L6Y 0M1.
FAN STORAGE
When storing your fan in the off season, it is important
to keep it in a safe dry location. It is important to protect
the fan head from dust. WE STRONGLY RECOMMEND
USING THE ORIGINAL BOX FROM PURCHASE.
To disassemble product simply reverse the steps used in
the assembly section.
If you have any questions regarding your product or
would like to learn more about other Bionaire
products, please contact our Consumer Service
Department at 1-800-253-2764 or visit our website at
www.bionaire.com.
®
Printed In China
Advertisement
