STAND BSF16 MODEL Read instructions before operating. Retain for future reference. Instruction Leaflet INFO-LINE If after having read this leaflet, you have any questions or comments on your fan, call 1-800-788-5350 in North America.
6) Always unplug the fan before moving it, putting on or taking off parts, cleaning, or whenever the fan is not is use. Be sure to pull by the plug and not the cord. 7) Avoid contact with moving parts. DO NOT operate without fan grills properly in place.
Then screw the small foot bracket into place. A. Grill Hub B. Decorative Cap C. Security Screw D. Front Grill E. Fan Blade Cap F. Washer/Nut G. Fan Blade H. Rear Grill Mounting Nut I. Rear Grill J. Motor Shaft K.
To start oscillation, pull knob down. To stop oscillation, push knob ADJUSTMENT INSTRUCTIONS TILT ADJUSTMENT Step 1. To change the tilting angle of the fan head, move the fan head to the desired angle. HEIGHT ADJUSTMENT Step 1. Turn the height adjustment knob counter-clockwise and slide the fan up or down to the desired position.
CLEANING/MAINTENANCE INSTRUCTIONS Follow these instructions to correctly and safely care for your Bionaire ® Stand Fan. Please remember: • Always unplug the fan before cleaning or disassembling. • Do not allow water to drip on or into the fan motor housing.
(parts and labor), any supplied or manufactured part of this fan which, upon inspection by an authorized service center, proves to have failed in normal use due to defects in material or workmanship, or, at its option, to replace the unit.
Need help?
Do you have a question about the BSF16 and is the answer not in the manual?
Questions and answers