Connecting Another Cd Player - Sony CDP-M333ES Operating Instructions Manual

Getting Started

Connecting Another CD Player

If you have a Sony CD player in which 5, 50, 200, 300,
or 400 discs can be inserted and which is equipped
with the CONTROL A1 (or CONTROL A1) jack and
the command mode of that player can be set to CD 3,
you can control that player as the second player with
this player. After connecting this player and an
amplifier, follow the procedure below.
Be sure to turn off the power of each player before
making this connection.
To an AC outlet
To audio output
To an AC outlet
6
Downloaded From Disc-Player.com Sony Manuals
To ANALOG OUT
To 2ND CD IN
CDP-CX235, etc.
To
CONTROL A1
To audio input
: Signal flow
What cords will I need?
• Audio cord (1) (Use the cord supplied with the player to be
connected.)
• Monaural (2P) mini-plug cord (1) (supplied for Canadian
models only)
1
Connect the players with an audio cord (see also
"Hookups" on page 5).
2
Connect the players with a monaural (2P) mini-
CDP-M333ES
plug cord.
For details on this connection, refer to the
supplementary "CONTROL A1 Control System"
instructions.
3
Set the command mode of this player to CD1
(factory setting) or CD2, and set that of the second
player to CD3.
Check the display for the current command mode
of this player, if the mode is CD3, change the mode
as described on the next page.
2nd
ALL DISCS
PROGRAM 1 2 3 X-FADE DELETE
MULTI
For details on how to operate the second player,
see "Controlling Another CD Player" on page 31
Amplifier
and "Playing Alternately" on page 32.
4
Connect the AC power cord of both players to an
AC outlet.
To an AC outlet
CDP-M333ES CDP-CX235, etc.
L L
R R
IN OUT
2ND CD ANALOG
CDP-M333ES CDP-CX235, etc.
CONTROL A1
NEXT DISC ART. HIT TRACK GROUP ART.
* D I S C - 1 * * *
1 SHUFFLE REPEAT 1 GROUP
CD TEXT NO DELAY CD1 CD2 CD3
Current command mode
LINE
OUT
L
R
CONTROL A1
MIN STEP SEC
* * *