Pro-Form ZE 6 User Manual page 12

12. While a second person holds the Console (8)
near the Upright (4), connect the Console
wires to the Upper Wire (116) and the Pulse
Wire (117).
Insert the excess wire into the Upright (4).
Tip: Avoid pinching the wires. Attach the
Console (8) to the Upright (4) with four M4 x
16mm Screws (97).
13. Apply a small amount of the included PTFE
grease to a paper towel. Spread a thin layer of
the PTFE grease evenly along the Right and Left
Tracks (11, 33) where the Rollers (48) move.
Then, wipe off any excess grease.
14. Plug the Power Adapter (114) into the receptacle
on the frame of the elliptical.
Note: To plug the Power Adapter (114) into an
outlet, see HOW TO PLUG IN THE POWER
ADAPTER on page 13.
15. Make sure that all parts are properly tightened before you use the elliptical. Note: Extra parts may be
included. Place a mat beneath the elliptical to protect the floor.
12
8
117
13
33
14
12
Avoid pinching
the wires
116
4
97
48
PTFE
Grease
11
114