Code 900FD Configuration Manual page 5

CR900FD Configuration Guide
NOTE:
The configuration change will take effect immediately and saved to memory.
Save Settings
Beep Volume 33%
(applicable for readers with
firmware version 0454 and newer)
Intentionally Left Blank
Motion Detection On,
Start Delay 500ms
Enable Motion Detection with
Stand Detection - Default
1 sec Duplicate Scan Delay
C007555_05_CR900FD_ConfigurationGuide
Reader ID and
Firmware Version
Beep Volume 0%
(applicable for readers with
firmware version 0454 and newer)
Continuous Scan Off - Default
Motion Detection On,
Start Delay 0,
Dark Environment
Disable Motion Detection with
Stand Detection
2 sec Duplicate Scan Delay
Beep Volume 100% - Default
Targeting On
Continuous Scan On
Motion Detection On,
Start Delay 500ms,
Dark Environment
Intentionally Left Blank
3 sec Duplicate Scan Delay
Beep Volume 67%
(applicable for readers with
firmware version 0454 and newer)
Targeting Off
Motion Detection On,
Start Delay 0 - Default
Motion Detection
Scanning Off
Duplicate Scan Disabled
Default Trigger Delay
5