Troubleshooting; Before Calling For Service - Motorola MicroTAC Owner's Manual

Troubleshooting

Before Calling For Service

Is the phone locked?
See Electronic Lock, page 39.
Is NS (No Service) lit?
See "Start-up Status Indicators" on page 5.
Have you charged the battery?
Refer to "Prepare the Battery for Initial Use" on page 1 for
charging instructions.
Have you programmed a unique operating mode?
Constant flashing of RM while in your home service area
may indicate that an incompatible System Type has been
selected. Refer to "Reviewing / Changing Scanning Mode"
on page 45.
Is the phone operating with non-standard
settings?
You may have inadvertently selected improper operating
characteristics. See Feature Menu, page 32.
Have you selected the wrong home system?
If your phone is programmed for Two-System Operation
(see page 44), press , to display the active
RCL
telephone number.
Are new MicroTAC accessories not working
with older MicroTAC phones?
Because of increased charging capabilities designed into
your new MicroTAC phone, some accessories that plug
into the data connector will not fit older versions of
MicroTAC phones.
NOTE Older versions of MicroTAC charging accessories
that plug into the data connector may not charge new
MicroTAC phones.
48