Storing An Area Code And Prefix (Postscripting); Memory Protect Feature - Motorola MicroTAC Owner's Manual

Storing Numbers in Memory
Storing an Area Code and Prefix
(Postscripting)
1. Enter the area code and prefix you wish to store.
2. Press .
STO
3. Enter a two-digit location number (e.g.,
,
0 1
etc.).
,
0 2
4. The location entered is displayed to confirm storage.
NOTE If FULL displays, refer to "Memory Protect
Feature" on page 13.
Storing an area code and prefix for a frequently called
location (such as an office) offers a convenient means of
"postscripting" the four-digit extension of the party you
wish to call.
To place a call using postscripting, see "Recalling Area
Code and Prefix (Postscripting)" on page 17.

Memory Protect Feature

The directory has an automatic memory protect feature
which prevents the accidental overwriting and loss of
previously stored numbers in memory. If you attempt to
store an entry to a currently occupied memory location,
the location number and FULL will display. The display
will then alternate between the previously stored number
and ChAngE? .
If you wish to save to that location, thus overwriting and
erasing the old information, press .
STO
If you wish to store the entry in an alternate location, press
, and the alternate location number.
END STO
13