Motorola MicroTAC Owner's Manual page 37

Advanced Memory Dialing Features
Instruction and Key Sequence
5 Enter the account number and # sign—
,
2 2
6 To store the number, press
the two-digit location number.
Now that the Memory Linked number has been created
and stored in memory, you may place the call as follows.
1. Press , 2-digit location number, and
RCL
phone will send the bank's phone number, and then
wait at the first pause.)
2. When the system answers and prompts you for your
bank PIN code, simply press
your bank PIN code and # sign.
3. When the system prompts you for your account
number, press
account number and # sign.
NOTE If the security PIN code feature is activated (see
"PIN Code Operation" on page 30), the security PIN code
will automatically be sent after the first pause by pressing
. Do not add your security PIN code to the linked
SND
sequence.
NOTE If you have divided your Memory Linked number
into two memory locations (e.g., 03 and 04), place the
initial call by pressing
system answers and prompts you, press
to send the first number group (up to the pause).
,
RCL SND
Press ,
RCL SND
stored in location 04.
NOTE Some electronic systems require that DTMF tones
be sent for several seconds by pressing and holding a key.
These signals, known as Long Tone DTMF, cannot be
transmitted using Memory Linking. If Long Tone DTMF
signals are required, you must send them manually .
,
, again to transmit your
RCL SND
,
RCL
to send each remaining number group
and
STO
, to transmit
RCL SND
,
,
0 3 SND
RCL
Display
7o8
88Co22c
. (Your
SND
. When the
, ,
,
0 4
23