Deleting A Memory Entry; Changing A Memory Entry - Motorola MicroTAC Owner's Manual

Storing Numbers in Memory

Deleting a Memory Entry

1. Press and hold
two-digit location number you wish to delete.
2. The phone will display FULL , flash the number in
memory, followed by ChAngE? .
3. Press
STO
deleting the entry.

Changing a Memory Entry

1. Press
RCL
the number to be changed is displayed.
2. Repeatedly press
displayed (all the digits, or just the ones you wish to
change).
3. Enter the new digits.
4. Press
STO
5. The location number and FULL will display. The
display will then alternate between the currently
stored number and ChAngE? .
6. Press
STO
memory location, overwriting the currently stored
number.
14
, then press
CLR
to delete, or press
and the two-digit location number so that
to "back out" each of the digits
CLR
and the same two-digit location number.
to save the newly entered number in this
, and enter the
STO
to exit without
END