Placing A Call; To Correct An Error; If Entering More Than 10 Digits - Motorola MicroTAC Owner's Manual

Basic Operation

Placing a Call

1. With power on, enter the number you wish to call.
2. Press . diALing and the dialed number will
SND
alternate in the display until the called party answers.
3. Begin the conversation when the called party answers.

To Correct an Error

To correct an error, press and quickly release to delete
CLR
the last character. To clear the entire entry, press and hold
for about 1 second. Your entire entry will be deleted,
CLR
and you may now re-enter the number you wish to call.

If Entering More Than 10 Digits

You can call a phone number with up to 16 digits, but only
the last 10 digits will appear in the display.
To recall a stored phone number that is longer than 10
digits, press and the memory location number. The
RCL
display will flash the memory location number and the last
10 digits of the number. Press again to view the entire
RCL
number.
6