3 - 14 MC50 with Windows Mobile 5.0 User Guide
Battery Insertion and Removal
Insert the battery into the battery well with the charging contacts on the battery aligning with the charging pins
on the adapter, and gently press down on the battery to ensure proper contact.
To remove the battery, press the battery release and lift battery out of the well.
Battery Well
Battery Release
UBC Adapter
Figure 3-14
Battery Charging Indicators
To charge a spare battery using the UBC adapter, insert the spare battery. The spare battery begins charging.
The UBC's charge LEDs show the status of the battery charging in the adapter.
charging status indications. The standard battery fully charges in approximately 2.5 hours and the extended
capacity battery fully charges in approximately six hours.
POWER
READY
(Green)
CHARGING or STANDBY or FAULT
(Solid Yellow)
UBC Adapter LEDs
Figure 3-15
Battery
(Flashing Yellow)
(Flashing Yellow)
UBC Adapter
POWER
READY
(Green)
CHARGING or STANDBY or FAULT
(Solid Yellow)
(Flashing Yellow)
(Flashing Yellow)
Table 3-3
shows battery