Motorola MC50 User Manual page 70

4 - 4 MC50 with Windows Mobile 5.0 User Guide
Troubleshooting the Mobile Computer (Continued)
Table 4-1
Problem
When receiving
beamed data an out
of memory message
appears.
The mobile computer
does not accept scan
input.
If, after performing these checks, the mobile computer is still not reading symbols, contact the distributor or
Motorola.
Cause
Not enough free The mobile computer requires at least twice the amount of
memory available memory available as the data you are receiving. For example, to
for receiving data. receive a 30K application, the mobile computer must have at
least 60K free.
Scanning Load a scanning application onto the mobile computer. See
application is not System Administrator.
loaded.
Unreadable bar Ensure the symbol is not defaced.
code.
Distance between Ensure the mobile computer is within proper scanning range.
exit window and bar
code is incorrect.
Battery is low. If the scanner stops emitting a scan beam when you press the
scan button, check the battery level. When the battery is low, the
mobile computer shuts off before the mobile computer notifies
you of the low battery condition.
Note: If the scanner is still not reading symbols, contact the
distributor or Motorola.
Solution