Eeprom Initialization - Oki OKIPAGE 10i Maintenance Manual

4.1.4

EEPROM initialization

The corresponding are of the EEPROM is initialized for each event as shown Table 4-1.
EEPROM area
Event
Menu resetting for
user maintenance
EEPROM resetting for
system maintenance
Engine resetting for
engine maintenance
Firmware revision
check error
LCD display:
EEPROM
RESETTING
Engine revision error
LCD display:
ENGINE RESET
Engine ID error
LCD display:
ENGINE RESET
Setting of data for
destination
User information error
LCD display:
EEPROM
RESETTING
: Represents initialization
Talbe 4-1
79
Remarks
This intialization occurs
when the existing ROM is
replaced by a ROM
whose revision No. is
different from the existing
ROM.
This intialization occurs
when a new EEPROM is
mounted.
This resetting occurs
when an irregular user
information is detected.