Assemblage; Transport & Storage - Fitvibe smart User Manual

2.3

Assemblage

1. Place the fitvibe smart on a horizontal and stable base.
2. Insert the handle (4) in the holes of the control unit and fix with 2 screws at each
side.
3. Use the designated connection (21) to connect the remote control (22).
4. Check whether the mains voltage is that is stated on the type shield corresponds
with the voltage of your mains supply (see 1.3.4)
5. Connect the power connection (18) of the device to an outlet
6. Switch the power switch (19) on.
2.4 Transport & Storage
Take account of the following matters if the equipment has to be transported or
stored:
Transport or store the equipment in the original packaging
The maximum period for transport or storage is 15 weeks
Temperature: -20°C to +60°C
Relative humidity: 10% to 100%
Atmospheric pressure: 500hPa to 1060hPA
Fitvibe SMART
figure 2
11