Stereo Mix Outputs - E-Mu XL-7 Command Station Owner's Manual

Stereo Mix
Outputs
This feature is useful for adding signal processing (EQ, reverb, etc.) of
individual sounds prior to final mixdown.
The routing can be performed according to MIDI channel from the Mix
Output screen in the Global menu. Simply assign each channel to the
desired output.
MIX OUTPUT
Global
channel 01: Send 2
Menu
To route a particular preset to a Send, first go to the Mix Output screen in
the Global menu and set the MIDI channel to "Preset".
MIX OUTPUT
Global
Menu
channel 01: Preset
Next set the Mix Output routing in the preset to the desired output (for
each layer). Yes, you can send each layer to a different send if you want.
L1
Preset Edit
Menu
Send 2
By sending different amounts of presets to the effects, subtle or striking
effects can be achieved using the two effect processors. This feature allows
you to get the most out of two effects since you can have eight different
mixes.
For more information, refer to the diagram on the following page or, See
"Mix Output" on page 152.
MIX OUTPUT
Programming Basics

Stereo Mix Outputs

XL-7 Owners Manual 199