E-Mu XL-7 Command Station Owner's Manual page 41

O O O O
Sometimes a simple
volume change will bring out
hidden voices and patterns.
Set up the Presets
Press the Preset View button (located beneath the LCD). The preset
8.
select screen appears.
Move the cursor underneath the Category field (as shown above) and
9.
select the "arp" category.
C01A
3
026
Move the cursor underneath the preset name and select any "arp"
10.
preset for channel 1A.
Press the "+" Track/Channel select button (located to the left of the
11.
LCD), so that C02A is displayed.
Select any other "arp" preset for channel 2A.
12.
Select channel 03A and choose another arp preset.
13.
Select Trigger Mode
Press the Selector Button in the upper left corner of the Command
14.
Functions section. Pressing this button will switch between Track
Enable/Mute and Triggers mode. Select Triggers mode.
Play it!
Now press Trigger Buttons 1, 2 and 3. You should be hearing three
15.
arpeggiators playing at once.
Change the arp preset on the current MIDI channel. Since the cursor is
16.
located on the preset name, all your selections will be in the arp
category.
Press the Track/Channel button and change the arp presets for
17.
channels 1A, 2A & 3A. Since each factory preset has differently
programmed arpeggiator settings, changing the preset not only changes
the sound, but the arpeggiator as well.
You can also play the keypads. You'll be playing the preset currently
18.
showing in the display.
Press the Control Select button above the knobs so that "Quick Edit" is
19.
selected. Adjusting the front panel control knobs now modifies the
preset showing on the LCD.
Press the Control Select button above the knobs again so that
20.
"Volume" is selected. The first three knobs now control the volume of
each arpeggiator preset.
There's lots more to the arpeggiators. To find out more, refer to the
arpeggiator chapter beginning on page 245.
V127 P00
arp:Hollographik
Instant Gratification
Multi-Channel Arpeggiator
A:P XL-7
XL-7 Owners Manual 29