Pattern Mode; Pattern Play - E-Mu XL-7 Command Station Owner's Manual

Pattern Mode

Pattern Play

   
L.E.D. Beat Markers
• The Tap Tempo LED stays on
slightly longer at each bar.
• The Tap Tempo LED flashes to
mark each quarter note.
56 E-MU Systems
Pattern mode is selected by pressing the Pattern mode button beneath the
liquid crystal display. The screen shown below is displayed in Pattern mode
when the sequencer is stopped.
T
01 STOP
0
000
Pressing Play in Pattern mode causes the selected pattern to
continuously play and loop. The display changes as shown.
T
01
CurPat: 002
The Track Mute buttons can be used to select specific tracks for playback.
The track mute settings are saved when the pattern is saved and restored
when the pattern is run.
Pressing the Stop button stops the pattern immediately. Pressing
Stop again rewinds the pattern to the beginning (RTZ).
Pressing the Stop button a third time reloads the initial setup
information for the Pattern (or Song).
To select another pattern while one is already playing: Turn the data
entry control in Pattern Mode/View. The lower line of the display changes
to show the name and number of the pattern you have selected. The
Home/Enter LED will be flashing.
T
01 STOP
0
015 Club Luv
Ln: 08
Start of IT
STOP Ln:08
0
NextPat: 002
Ln:08
Pattern Mode
Bar: 01 . 1
Bar:01 .1
0
Bar:01 .1
Sequencer